These replacement filters are of the highest quality. They are all easily replaced by using simple hand tools (two Crescent wrenches) and a suitable receptacle such as a plastic bag to place to old filter in. For more information about how to replace the filters, please see the Air Filter manual.
All three of these filters come with the True NBC AirFiltration Ventilation System:
The TWO pre-filters are designed to extend the life of the HEPA filter by trapping both large and small particles. The first filter is the roughing filter with an average efficiency of 25 to 30 percent when tested in accordance with ASHRAE 52.1. The roughing filter extends the life of the intermediate filter or pre-filter and reduces its change frequency. The second filter is the intermediate filter with an average efficiency of 80 to 85 percent when tested in accordance with ASHRAE 52.1.
Pre-filter #1 $55.00 + s&h.
Carbon Absorber Pre-filter #2 $395.00 + s&h
The nuclear grade HEPA filter is a special filter we have made just for our application.Each HEPA filter is individually tested to MIL-STD-282 before it leaves the factory, your assurance that it meets rated efficiency. The penetration and actual airflow rate are indicated on the label. Each filter is also assigned an individual serial number.
Every HEPA filter is individually DOP tested: This has been the industry standard test method for many years. It is conducted using a forward light scattering photometer. The HEPA is challenged with 0.3 micrometer particles of dioctyl-phthalate (DOP). By measuring the upstream and downstream concentration of these particles, the HEPA filter cell efficiency can be calculated.
Underwriters Laboratories Classification UL 586: This classification to insure that each HEPA filter cell is individually tested at the factory. Additionally, representative HEPA filter cells are tested by UL to ensure that they provide their rated HEPA level filtration, after being subjected to the following conditions of a high moisture environment of (90% R.H.), a high temperature environment of (371 deg/C), low temperature environment of (-3 deg/C). UL also subjects the HEPA filter cell to a spot flame test of (954 deg/C).
Media: Water repellant glass micro fiber 99.97% True HEPA cell type (A)
Cell Side Material: Fire retardant particle board
Bond: Polyurethane foam
Gasket Material: Neoprene (RE43E1)
Gasket Location: Both sides
Factory Test: Certified 99.97% (DOP)
UL 866 Label: Required:
Order # 42210 for filter # 3 HEPA filter $335.00 + s&h.
Note: Air Filters Systems and components are a NON-Returnable Item. All Sales final.